changes made to my drill gauge

this is what  i stared with 

then I change the design 

then i made this

Drill Gauge work

Drill Gauge.

Last term we created a drill gauge to measure drill sizes 

The tools we used Micrometer, Vernier Caliper, Engineer Square, scribe, 300mm rule, Centre punch, Hammer and Odd leg caliper.


marking out

Marking out or layout means the process of transferring a design or pattern to a workpiece, as the first step in the manufacturing process. It is performed in many industries or hobbies although in the repetition industries the machine's initial setup is designed to remove the need to mark out every individual.



filing

A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks

micrometer

A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers.

 vernier

A vernier scale is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using Vernier acuity to reduce human estimation error. Measuring more precisely than could be done unaided when reading a uniformly divided straight or circular measurement scale

engineers square
A machinist square or engineer's square is the metalworkers' equivalent of a try square. It consists of a steel blade inserted and either welded or pinned into a heavier body at an angle of 90°. Usually a small notch is present at the inside corner of the square.





drill press

1. Know your drill press. ...
2. Always wear safety goggles or a face shield.
3. Be sure that the chuck key is removed from the chuck before turning on the power. ...
4. Never attempt to use a hand auger bit in a drill press. ...
5. Hold the workpiece firmly so that it will not fly or spin off the table.

punch tool
A punch is a hard metal rod with a sharp tip at one end and a blunt butt end at the other, which is usually struck by a hammer. Typically, woodworkers use a ball-peen hammer to strike a punch.



punch tool numbers


this is the same thing as a punch tool but with numbers so when the hammer it marks out with numbers.




hammer


A hammer is a handheld tool used to strike another object. It consists of a handle to which is attached a heavy head, usually made of metal, with one or more striking surfaces. There are dozens of different types of hammers. The most common is a claw hammer, which is used to drive and pull nails

________________________________________________________________________________

this is me using a drill gauge



___________________________________________________________________________

this is my tinkercad.

_________________________________________________________________________________

hope you enjoyed reading.

PE floor hocky

1. on a scale of 1-10, rate yourself on how well you participate in the previous lesson. being bit cit all. 10 being all the time    8-10 

 

2. why did you rate yourself the way you did  that I don't know 

3. what do you think you did well  

4 what skills did you use to accomplish passing and drilling  not sure 

5. what do you think you need to improve upon for next time what strategy will you use?  don't know  

Focussed Listening

what instruments can you hear?

how would you decide the singers' voice?

what kind of feeling have song have? 

no 2 

what instruments can you hear?

which instruments play in solo? 

how many people are in the group? 

what is the difference between ska and reggae?

adele-hello 

piano

bass

vocals

powerful

calm voice

sad 

hello- cover 

piano 

bass 

vocals 

drums 

different 

upbeat 

Get smart 

drums 

guitar 

piano

bass

trumpet 

vocals

trumbone 

trombone 

trumpet

Guitar 

lots of people in the group 

not sure 

do you like this song?

maxi priest wild world 
I didn't mind this song

• it had a nice feeling 
• the genre is not that bad 
•  the song is nice and mallow