Science 2019

This is my research project from science

english 2019 Essay

so this is my essay it is not the best.

Introduction: 

A memorable idea In Children of Blood and Bone by Tomi Adeyemi is seeing others as individuals
in the novel father carving MAGGOT into Zelie’s back and inan can’t do anything about it.
It shows father hates the maji so much he carved Maggot into a Girls back.
A challenging setting is not sure. I don’t 

Body 1 

The  idea is shown in chapter 66

 WhenFather standing there and carving MAGGOT into  Zelie’s back is just another day’s work he said
 In that instant, it hits me  Zulaikha’s death. Zélie’s screams. And inan can't do a thing about her scream.
They don’t mean a thing to him. Because they’re maji, they’re nothing. 

Body 2

This idea is still shown in chapter 66  

This really shows that father hates maji so much he carved MAGGOT.
in a girl back and made her scream and scar on her back for the rest of her life. 

Body 3 

This idea is shown in chapter 64 

   My duty has to be keeping Orïsha alive.
But the creed rings hollow, carving a hole inside me like the knife that carved through Zélie’s back.
Duty isn’t enough when it means destroying the girl I love.
Zélie and Inan have lost a part of themselves because of King Saran.

Zélie performs the ritual, which seems to give magic back to -everyone-
We are all human. So inan save Zelie from the pain. 

Conclusion

So i don’t know if I answer the question I tried my best

It can be hard life.

science

what are you investigating

corrosion

what do you think will happen?

what is corrosion? 

when metals are exposed to the environment they can deteriorate, or break down. scientists call this process corrosion rust is the term used to decide the corrosion of iron.  

The stolen genration

The Stolen Generation

the Stolen Generation was when half cast kids were taken from there family and taken places like Moore river.

the song is took the children away by Archie Roach is about how children were taken away from there mother and put into schools and put into foster homes and told to forget their old families for good.
https://youtu.be/VeHGlJ32tak

10 treble music

1. I played the bass on the piano
2. yes i was happy with the bass part
3. i would change noting.

changes made to my drill gauge

this is what  i stared with 

then I change the design 

then i made this

Drill Gauge work

Drill Gauge.

Last term we created a drill gauge to measure drill sizes 

The tools we used Micrometer, Vernier Caliper, Engineer Square, scribe, 300mm rule, Centre punch, Hammer and Odd leg caliper.


marking out

Marking out or layout means the process of transferring a design or pattern to a workpiece, as the first step in the manufacturing process. It is performed in many industries or hobbies although in the repetition industries the machine's initial setup is designed to remove the need to mark out every individual.



filing

A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks

micrometer

A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers.

 vernier

A vernier scale is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using Vernier acuity to reduce human estimation error. Measuring more precisely than could be done unaided when reading a uniformly divided straight or circular measurement scale

engineers square
A machinist square or engineer's square is the metalworkers' equivalent of a try square. It consists of a steel blade inserted and either welded or pinned into a heavier body at an angle of 90°. Usually a small notch is present at the inside corner of the square.





drill press

1. Know your drill press. ...
2. Always wear safety goggles or a face shield.
3. Be sure that the chuck key is removed from the chuck before turning on the power. ...
4. Never attempt to use a hand auger bit in a drill press. ...
5. Hold the workpiece firmly so that it will not fly or spin off the table.

punch tool
A punch is a hard metal rod with a sharp tip at one end and a blunt butt end at the other, which is usually struck by a hammer. Typically, woodworkers use a ball-peen hammer to strike a punch.



punch tool numbers


this is the same thing as a punch tool but with numbers so when the hammer it marks out with numbers.




hammer


A hammer is a handheld tool used to strike another object. It consists of a handle to which is attached a heavy head, usually made of metal, with one or more striking surfaces. There are dozens of different types of hammers. The most common is a claw hammer, which is used to drive and pull nails

________________________________________________________________________________

this is me using a drill gauge



___________________________________________________________________________

this is my tinkercad.

_________________________________________________________________________________

hope you enjoyed reading.